PRODUCT FEATURES
• Slim Right-Angle Profile: Compact 1/4″ mono plug design minimizes cable strain and fits into tight, space-constrained installations.
• Premium Chrome Finish: Fine-finished, chrome-plated housing delivers a polished, professional look that holds up over time.
• Corrosion-Resistant Contacts: Nickel-plated brass contacts ensure stable signal transfer and long-term reliability.
• Rugged Die-Cast Build: Zinc alloy housing withstands daily wear and tear in touring, studio, or install environments.
• Secure Cable Retention: Chuck-style clamp sleeve locks the cable in place, preventing slippage or accidental disconnects.
• Proven Durability: Rated for 1,000+ mating cycles, backed by 1000V DC dielectric strength and >2 GΩ insulation resistance.
•
TECHNICAL SPECIFICATIONS
PRODUCT PARAMETERS
Connection type: Plug
Gender: Male
ELECTRICAL PARAMETERS
Rated Current: subject on mating connector
Rated Voltage: < 50 V Contact Resistance: subject on mating connector Dielectric Strength: 1000 V DC Insulation Resistance: > 2 GΩ
MECHANICAL PARAMETERS
Service Life: > 1000 mating cycles
Cable Size: 1 mm²
18 AWG
Cable OD: 4-7 mm
MATERIAL AND ENVIRONMENTAL PARAMETERS
Housing: Zinc alloy
Contacts: Brass
Contact surface: Ni
Housing plating: Cr
Temperature range: -20°C ~ +65°C
STANDARDS AND CERTIFICATIONS
Solderability: IEC 68-2-20
Certifications: IEC 60603-11/EIA RS-453
Description
The MP2RX is a slim, mono 1/4″ right-angle plug engineered for reliable, long-term performance in professional audio applications. Built on a sturdy die-cast zinc alloy housing with a chrome-plated finish and nickel-plated brass contacts, the MP2RX combines a compact right-angle profile with a chuck-style clamp sleeve for secure cable retention. Its polished housing design makes cable termination and field assembly straightforward, while its low-profile form factor is ideal for tight cable runs and space-constrained installations. Rated for use up to 50V DC and tested for more than 1,000 mating cycles, the MP2RX is built to withstand repeated use in demanding environments.
Key Features
• Slim Right-Angle Design : A low-profile 1/4″ mono right-angle plug that reduces strain on cables and fits neatly into tight spaces.
• Chrome-Plated Housing : A precision, fine-finished chrome exterior delivers a durable, professional appearance.
• Nickel-Plated Contacts : Ensures stable signal transfer and long-term corrosion resistance.
• Die-Cast Construction : A sturdy zinc alloy housing provides excellent durability under repeated use.
• Chuck-Style Clamp Sleeve : Delivers secure, reliable cable retention and strain relief.
• Easy-Grip Housing : A polished, ergonomic design allows for smooth handling during installation and removal.
• Broad Cable Compatibility : Accommodates cable outer diameters from 4-7mm.
Material and Environmental Specifications
• Housing Material : Constructed from zinc alloy for structural strength and durability.
• Contact Material : Brass contacts with a nickel surface finish for consistent conductivity.
• Housing Plating : Chrome-plated exterior for a refined, corrosion-resistant finish.
• Operating Temperature Range : Performs reliably between -20°C and +65°C.
• Certified Standards : Solderability tested to IEC 68-2-20; certified to IEC 60603-11 / EIA RS-453.
Packaging and Accessories
• Individual Bagging : Each unit is packaged individually, complete with insert, housing, top cover, transparent insulation tube, and boot.
• Carton Configuration : Packed 100 pieces per inner carton and 5 inner cartons per master carton, for 500 pieces per master carton.
• No Additional Accessories Required : Ships complete and ready for cable termination, with no extra hardware needed.
Assembly Instructions
• Prepare the Cable : Thread the cable through the boot, housing, and insulation tube before stripping.
• Strip to Spec : Strip the cable to the dimensions specified in the datasheet, exposing the shielding layer and signal wire.
• Solder and Secure : Solder the conductor to the insert and secure the cable using the built-in clipboard-style cable clamp.
• Insulate and Cap : Slide the insulation tube over the cable and snap the top cover onto the assembled insert.
• Final Assembly : Tighten the housing clockwise onto the insert component, then tighten the boot clockwise onto the housing to complete assembly.
ORDERING INFORMATION
Minimum order: 40 pieces of this model. Price shown is per piece. Confirm the exact model, mating connector and cable dimensions before ordering.
Product and order enquiries: https://www.bspoo.com/contact-us/
Shipping and order support: https://www.bspoo.com/shipping-order-support/
