NovaStar H_STD I/O Card

Select the NovaStar H_STD I/O Card for projects requiring a led video wall processor. This listing identifies the exact model so you can compare the required connections and specifications before purchase.

Key configuration details: Description: Programmable RS422/RS485/RS232 ports; Purpose: Control devices that adopt RS422/RS485/RS232 protocol; Description: 10/100Mbps self-adaptive; Purpose: Control the device connected to this card; Protocols: TCP/IP protocol and UDP/IP protocol supported; Description: Programmable GPIO ports.

Model specifications

• Description: Programmable RS422/RS485/RS232 ports
• Purpose: Control devices that adopt RS422/RS485/RS232 protocol
• Description: 10/100Mbps self-adaptive
• Purpose: Control the device connected to this card
• Protocols: TCP/IP protocol and UDP/IP protocol supported
• Description: Programmable GPIO ports
• Purpose: Trigger execution of function requirements via programming
• Modes: Input and output modes supported
• Configuration: Pins 1, 2 and 3 can be set to either input or output, pin G is common ground
• Description: Relay control outputs
• Purpose: Control power on/off of connected devices
• Specifications: Max 30 VDC, 3A
• Configuration: Six pins divided into three groups, can be connected/disconnected via programming
• Description: Infrared control outputs
• Purpose: Programmable infrared control
• Configuration: Pins 1, 2 and 3 for infrared emission, pin G is common ground
• 2x programmable COM ports (RS422/RS485/RS232) for serial device control
• 1x 10/100Mbps self-adaptive Ethernet control port (TCP/IP and UDP/IP)
• 3x programmable GPIO I/O pins (each settable as input or output, plus common ground)
• 3x relay outputs (max 30 VDC, 3A) for power on/off control of connected devices

Check the model number, system requirements and selected configuration before ordering. Optional components and accessories are not included unless explicitly specified.