Select the NovaStar H_STD I/O Card for projects requiring a led video wall processor. This listing identifies the exact model so you can compare the required connections and specifications before purchase.
Key configuration details: Description: Programmable RS422/RS485/RS232 ports; Purpose: Control devices that adopt RS422/RS485/RS232 protocol; Description: 10/100Mbps self-adaptive; Purpose: Control the device connected to this card; Protocols: TCP/IP protocol and UDP/IP protocol supported; Description: Programmable GPIO ports.
Model specifications
- Description: Programmable RS422/RS485/RS232 ports
- Purpose: Control devices that adopt RS422/RS485/RS232 protocol
- Description: 10/100Mbps self-adaptive
- Purpose: Control the device connected to this card
- Protocols: TCP/IP protocol and UDP/IP protocol supported
- Description: Programmable GPIO ports
- Purpose: Trigger execution of function requirements via programming
- Modes: Input and output modes supported
- Configuration: Pins 1, 2 and 3 can be set to either input or output, pin G is common ground
- Description: Relay control outputs
- Purpose: Control power on/off of connected devices
- Specifications: Max 30 VDC, 3A
- Configuration: Six pins divided into three groups, can be connected/disconnected via programming
- Description: Infrared control outputs
- Purpose: Programmable infrared control
- Configuration: Pins 1, 2 and 3 for infrared emission, pin G is common ground
- 2x programmable COM ports (RS422/RS485/RS232) for serial device control
- 1x 10/100Mbps self-adaptive Ethernet control port (TCP/IP and UDP/IP)
- 3x programmable GPIO I/O pins (each settable as input or output, plus common ground)
- 3x relay outputs (max 30 VDC, 3A) for power on/off control of connected devices
Check the model number, system requirements and selected configuration before ordering. Optional components and accessories are not included unless explicitly specified.
NovaStar Documents & Downloads
Host-series reference documents: this module is listed within the following system documents. These documents cover the host system and its supported modules.
Specifications
Check the document model, version and hardware revision before use. Archived versions are retained with their original version numbers.
